Synthesis,Characterization and Migration of Ionic Polyferrocenyl Compounds of 5‐Ferrocenyl‐1H‐tetrazole and Their Effects During Combustion

Eighteen ionic polyferrocenyl compounds with 5‐ferrocenyl‐1H‐tetrazolate as anion and mono‐ and dinuclear ferrocenyl‐alkylammonium as cations were synthesized and characterized by ¹H NMR, ¹³C NMR, FT‐IR, and UV/Vis spectroscopy, and elemental analysis. Molecular structures of three compounds were further confirmed by single‐crystal X‐ray diffraction. Their thermal stability was evaluated by TG and DSC and found that they are of high thermal stability. The cyclic voltammetry analysis suggested that each of the compounds exhibits only an irreversible redox wave of the ferrocene units in the molecule. Both migration and volatility test results showed that, on comparison with those of Catocene, all tested compounds exhibit much more excellent anti‐migration ability and most of the tested compounds have lower volatility. Their effects on the thermal disintegration of ammonium perchlorate (AP), 1,3,5‐trinitro‐1,3,5‐triazacyclohexane (RDX), and 1,2,5,7‐tetranitro‐1,3,5,7‐tetraazacyclooctane (HMX) were measured by DSC. The results revealed that most of the compounds exhibit significant catalytic effects on the thermal degradation of AP and RDX. Particularly, most of the compounds containing one ferrocene unit in their cations show higher activity than that of Catocene. These compounds can be used as alternatives to Catocene in the composite solid propellants.     

Green fabrication of sandwich-like and dodecahedral C@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C as high-performance anode for lithium-ion batteries

Sandwich-structured C@Fe₃O₄@C hybrids with Fe₃O₄ nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe₃O₄@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe₃O₄@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g^?1 at 0.05 A g^?1), good high-rate behavior (796 mAh g^?1 at 10 A g^?1), and negligible capacity loss after 120 cycles.     

Ni<Subscript>0.37</Subscript>Co<Subscript>0.63</Subscript>S<Subscript>2</Subscript>-reduced graphene oxide nanocomposites for highly efficient electrocatalytic oxygen evolution and photocatalytic pollutant degradation

A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents (NCS@rGO-x) has been successfully prepared via a facile one-step hydrothermal method and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The XRD and FESEM analyses revealed that the phase structure and morphology of NCS nanoparticles were substantially influenced by the graphene contents. The phase structure of NCS nanoparticles gradually transformed from primary NiCo₂S₄ to Ni_0.37Co_0.63S₂ and the morphology and size of NCS nanoparticles were found to become more regular and homogeneous with the increase of graphene concentration. On the NCS@rGO-x nanocomposites, the NCS@rGO-2 sample demonstrated the best catalytic activity toward the OER, which delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. Furthermore, the NCS@rGO-2 sample showed the remarkable photocatalytic activity for degradation of methylene blue (MB), which may be attributed to the increased reaction sites and high separation efficiency of photogenerated charge carries due to the electronic interaction between NCS nanoparticles and rGO. All these impressive performances indicate that the NCS@rGO-2 nanocomposite is a promising catalyst in energy and environmental fields.

Open image in new window

Graphical abstract A series of Ni_0.37Co_0.63S₂-reduced graphene oxide nanocomposites with different graphene contents has been successfully prepared and applied as the catalysts for the oxygen evolution reaction (OER) and degradation of organic pollutants. The NCS@rGO-2 catalyst-modified stainless steel wire mesh (SSWM) electrode delivers a stable current density of 10 mA cm^?2 at a small overpotential of ～276 mV (vs. RHE) with a Tafel slope as low as 48 mV dec^?1. At the same time, the NCS@rGO-2 catalyst is also first investigated as an efficient photocatalyst for degradation of MB.

     

Molecular engineering tuning optoelectronic properties of thieno[3,2-<Emphasis Type="Italic">b</Emphasis>]thiophenes-based electrochromic polymers

Thieno[3,2-b]thiophene (TT) monomers end-capped with 3,4-ethylenedioxythiophene (EDOT) moieties are electropolymerized to form π-conjugated polymers with distinct electrochromic (EC) properties. Steric and electronic factors (electron donor and acceptor substituents) in the side groups of the TT core, as well as the structure of the polymer backbone strongly affect the electrochemical and optical properties of the polymers and their electrochromic characteristics. The studied polymers show low oxidation potentials, tunable from–0.78 to +0.30 V (vs. Fc/Fc⁺) and the band gaps from 1.46 to 1.92 eV and demonstrate wide variety of color palettes in polymer films in different states, finely tunable by structural variations in the polymer backbone and the side chains. EC materials of different colors in their doped/dedoped states have been developed (violet, deep blue, light blue, green, brown, purple-red, pinkish-red, orange-red, light gray, cyan and colorless transparent). High optical contrast (up to 79%), short response time (0.57–0.80 s), good cycling stability (up to 91% at 2000 cycles) and high coloration efficiency (up to 234.6 cm² C^–1) have been demonstrated and the influence of different factors on the above parameters of EC polymers have been discussed.     

A note on Arzela–Ascoli's lemma in almost periodic problems

This paper is concerned with a generalized Arzela–Ascoli's lemma, which has been extensively applied in almost periodic problems by the continuation theorem of degree theory. We give a counter example to show that this lemma is incorrect, and there is a gap in the proof of some existing literature, where the addressed generalized Arzela–Ascoli's lemma was used. Moreover, we make some final comments and introduce an open problem. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

1H NMR Reassignment for Z/E-Benzomalvins B and Absolute Configuration of Benzomalvin C

Chemistry of Natural Compounds - Benzomalvins B, C, and E (1, 2, and 3) were simultaneously obtained from the marine fungus Aspergillus sp. isolated from the soft coral Sinularia sp., collected...     

Design,synthesis, and insecticidal activities of novel diamide derivatives with alpha-amino acid subunits

A series of diamide derivatives containing α-amino acids were designed and synthesized. These compounds were evaluated for their insecticidal activities against Plutella xylostella, Mythimna separate, Myzus persicae, and Tetranychus cinnabarinus. Most of the title compounds containing an l -phenylglycine skeleton were endowed with good activities at the concentration of 500 mg·L⁻¹. Compounds ( R)-A6 showed a potential value for further optimization as an insecticidal lead with the LC₅₀ value of 86.8 mg·L⁻¹.     

碱性介质中氢氧化反应电催化剂的开发:从机理认识到材料设计

阴离子交换膜(AEM)燃料电池因具有使用非贵金属作为催化剂的优点而受到广泛关注.然而,在碱性体系中,AEM燃料电池中氢氧化反应(HOR)的反应动力学比在酸性介质中的慢两个数量级.针对HOR在碱中动力学缓慢的问题,有两种主要的理论来解释,(1)pH相关的氢结合能作为主要影响因素来控制HOR动力学的理论;(2)质子和氢氧根离子的吸附共同作为影响因子来控制HOR在碱性条件下的动力学的双功能理论.本文首先讨论了在碱性电解质中可能的HOR反应机理及其Tafel性能变化.除了传统的Tafel-Volmer和Heyrovsky-Volmer-HOR机理外,还讨论了最新提出的氢氧根离子吸附参与的HOR机理来说明在酸性和碱性介质中HOR机理的差异.然后,总结了具有代表性的碱性HOR催化剂(如贵金属、合金、金属间化合物、镍基合金、碳化物、氮化物等),简要介绍了它们相应的HOR反应机理,从而进一步理解在碱性介质中不同基元反应步骤给HOR性能带来的差异.最后,提出了一种未来设计HOR碱性催化剂的可行性方案,为今后碱性环境下的HOR催化剂设计提供参考.